Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

The design of an interfacial structure is particularly important for load transfer in composites. In this paper, different amounts of carbon nanotubes (CNTs) were grafted onto the carbon fiber (CF) surface by adjusting grown temperature using injection chemical vapor deposition (ICVD). The prepared CF preform grafted with CNTs (CNTs-CF) were used to reinforce magnesium alloy by squeeze casting process. The microstructures were analyzed by means of optical microscope (OM) and scanning electron microscope (SEM), and the interlaminar shear strength (ILSS) and tensile strength of the composites were determined by double-notch shear test and tensile test. The results indicated that moderate ILSS was more conducive to improving the tensile properties of carbon fiber reinforced magnesium matrix (C_f/Mg) composites. Compared with C_f/Mg, the tensile strength of composite with CNTs increased by about 80%. For C_f/Mg composites grafted with CNTs, CNTs had the effects of delaying crack propagation and increasing energy consumption by the pull-out and bridging mechanism, which were the main reasons for improving the strength. The analysis of shear fracture surface showed that the crack propagation path can be optimized by adjusting the amounts of grafted CNTs. The presence of CNTs affects the stress distribution and consequently the crack initiation as well as the crack propagation.     

Strategies to Apply Water-Deficit Stress: Similarities and Disparities at the Whole Plant Metabolism Level in Medicago truncatula

Water-deficit stresses such as drought and salinity are the most important factors limiting crop productivity. Hence, understanding the plant responses to these stresses is key for the improvement of their tolerance and yield. In this study M. truncatula plants were subjected to 250 mM NaCl as well as reduced irrigation (No-W) and 250 g/L polyethylene glycol (PEG)-6000 to induce salinity and drought stress, respectively, provoking a drop to −1.7 MPa in leaf water potential. The whole plant physiology and metabolism was explored by characterizing the stress responses at root, phloem sap and leaf organ level. PEG treatment led to some typical responses of plants to drought stress, but in addition to PEG uptake, an important impairment of nutrient uptake and a different regulation of carbon metabolism could be observed compared to No-W plants. No-W plants showed an important redistribution of antioxidants and assimilates to the root tissue, with a distinctive increase in root proline degradation and alkaline invertase activity. On the contrary, salinity provoked an increase in leaf starch and isocitrate dehydrogenase activity, suggesting key roles in the plant response to this stress. Overall, results suggest higher protection of salt-stressed shoots and non-irrigated roots through different mechanisms, including the regulation of proline and carbon metabolism, while discarding PEG as safe mimicker of drought. This raises the need to understand the effect at the whole plant level of the different strategies employed to apply water-deficit stress.     

Environmental impact estimation of ceramic lightweight aggregates production starting from residues

Within a circular economy approach, this study investigates the environmental impact of lightweight aggregates (LWAs) produced starting from different mixes of different clays with brewery sludge and cattle bone flour ash (CBA), used as poring and fertilizing agents, respectively. The environmental impact was evaluated by means of release tests, insulation capacity, carbon footprint (CFP), and particulate matter emission during pellet firing. Release tests representative of LWAs realistic application showed very high release of phosphate and satisfactory release of potassium. The thermal insulation of the LWAs was tested by thermal imaging camera and resulted highly variable depending on the composition, with the mix containing CBA performing best. This latter composition leads also to the smallest CO₂ equivalent emission, due to the calorific power of CBA, allowing lower consumption of fossil fuels during the LWA production. Finally, total particulate emissions during the thermal treatment resulted similar in terms of mass for all mixes, while differences in terms of particle morphology and composition occurred. Samples containing residue resulted with a quite good release behavior, CFP, and insulation properties, but higher emission of particles, particularly when glass is added.     

Surface energies in high-entropy carbides with variable carbon stoichiometry

The carbon vacancy in high-entropy carbides (HECs) has a significant impact on their physical and chemical properties, yet relevant studies have still been relatively few. In this study, we investigate the surface energies of HECs with variable carbon vacancies through first-principles calculations. The results show that the surface energy of the (1 0 0) surface of the stoichiometric HECs is significantly lower than that of (1 1 1) surface. With the decrease in carbon stoichiometry, the surface energies of both (1 0 0) and (1 1 1) surfaces increase gradually, which is mainly due to the weakening of covalent bonding and the decrease of metal Hirshfeld-I (HI) charges. However, the surface energy of (1 0 0) surface increases more quickly than that of (1 1 1) surface and will exceed that of (1 1 1) surface when the carbon stoichiometry decreases to a certain extent, which is primarily attributed to the greater decrease rate of metal HI charges of (1 0 0) surface.     

Evaluation and Characterization of Mechanical, Electrical, and Thermal Properties of Polymer Nanocomposites Reinforced with Different Allotropes of Carbon

The present work aims to present the results based on the processing of nanocomposites, which consist of matrix materials like epoxy and filler materials such as conjugated nanomaterials/allotropes of carbon, namely, carbon black, graphite, and multiwalled carbon nanotube (MWCNT) used for targeted applications. To improve the physical and chemical properties and to facilitate a better interfacial interface between the polymer and nanotube, functional MWCNT is used during the preparation of the composite. The prime objective of the study is to establish the thermal, mechanical, and electrical properties of nanocomposites using experimental methods. It has been observed from the experimental results that carbon nanotube (CNT) based composite exhibits higher mechanical (tensile and hardness) and thermal properties as compared with the others. The electrical properties are found to be better in a graphite-based composite. Although CNT has superior mechanical and thermal properties, the exorbitant price limits its use. Hence, the allotropes of carbon may be used judiciously considering both the cost and property requirements of the targeted application. The work also studies the dispersion state of nanofibers through scanning electron microscopy (SEM).     

Formation of Sn filled CNTs nanocomposite: Study of their magnetic,dielectric properties and enhanced microwave absorption performance at gigahertz frequencies

The Simplistic formation, advantageous configuration, non-colossal magnetoresistance and broadband absorption are important parameters for microwave absorbent materials. In this study, a core-shell nanocomposite comprising of Sn-filled carbon nanotubes (Sn/CNTs) was prepared by arc discharge method. The microstructure, morphology and surface composition of Sn/CNTs-based core-shell nanocomposites were characterized in detail. Sn/CNTs nanocomposite showed a magnetic signal due to the broken bonds and defects at interfaces in Sn/CNTs. The weak ferromagnetism was found to be helpful in improving magnetic permeability in the Sn/CNTs which confirms its role as a magnetic loss material under incident electromagnetic wave. Sn-filled CNTs revealed an appropriate value of dielectric constant, which plays an important role in impedance matching upon incident electromagnetic wave. The composite of Sn-CNTs and paraffin with a 50 wt % loading showed the lowest reflection loss (RL) of ?43.87 dB at 10 GHz, with a wide effective absorption band (RL ≤ ?10 dB) of 3 GHz in thickness of 2.3 mm. This enhanced performance is attributed to the combined effect of the conduction loss in one-dimensional core-shell architecture, the interfacial loss Sn-CNT interface, the magnetic loss due to defects-induced ferromagnetism in Sn shell, and in the carbon-containing atomic layers of CNTs.     

Combating Biofilm Associated Infection In Vivo: Integration of Quorum Sensing Inhibition and Photodynamic Treatment based on Multidrug Delivered Hollow Carbon Nitride Sphere

Recently, quorum sensing (QS) inhibitors (QSIs) have been combined with antibiotics to enhance antibiofilm efficacy in vitro and in vivo. However, targeting QS signals alone is not enough to prevent bacterial infections. Drug resistance and recurrence of biofilms makes it difficult to eradicate. Herein, photodynamic therapy (PDT) is selected to unite QSIs and antibiotics. A synergistically antibiofilm system, which combines QSIs, antibiotics, and PDT based on hollow carbon nitride spheres (HCNSs) is envisaged. First, HCNS provides the multidrug delivering ability, enabling QSIs and antibiotics to be released in sequence. Subsequently, multistage releases sensitize bacteria effectively, potentiating the chemotherapeutic effects of the antibiotics. Finally, the integration of QSIs and PDT not only minimizes the possibility of drug resistance, but also overcomes the problem of limited mass and extension of PDT. Even after 48 h of incubation, the bacterial biofilm is obviously inhibited. And its biofilm disperse efficiency exceeds 48% (compared with QSI‐potentiated chemotherapy group) and 40% (compared with PDT group). Besides, the inhibition of the QS system influences phenotypes related to virulence factor production and surface hydrophobicity, which weaken biofilm invasion and formation. Eventually, this system is applied to disperse bacterial biofilm in vivo. Overall, PDT and QS modulation are devoted to eradicate drug resistance and recurrence of the biofilm.     

On the buckling properties of concentric carbon/boron-nitride multi-walled nanotubes: A finite element investigation

Finite element modeling approach is used here to investigate the behavior of concentric multi-walled boron-nitride and carbon nanotubes under the compressive loadings. Double-walled and triple-walled concentric boron-nitride and carbon nanotubes with different arrangements and geometries are considered. It is shown that multi-walled boron-nitride nanotubes lose their stabilities at larger compressive forces than other arrangements in which at least one carbon wall exists. Comparing the armchair and zig-zag multi-walled nanotubes, the latter one has larger buckling force than the former one. It is also shown that the nanotubes with smaller radii have larger critical compressive forces than those with larger radii.     

Solution‐Processable Photonic Inks of Mie‐Resonant Hollow Carbon–Silica Nanospheres

Hollow carbon–silica nanospheres that exhibit angle‐independent structural color with high saturation and minimal absorption are made. Through scattering calculations, it is shown that the structural color arises from Mie resonances that are tuned precisely by varying the thickness of the shells. Since the color does not depend on the spatial arrangement of the particles, the coloration is angle independent and vibrant in powders and liquid suspensions. These properties make hollow carbon–silica nanospheres ideal for applications, and their potential in making flexible, angle‐independent films and 3D printed films is explored.